Computex 2011: The ‘suit’-case from Lian Li
by Ian Cutress on June 1, 2011 5:06 AM EST- Posted in
- Computex 2011
- Cases/Cooling/PSUs
- Lian Li
I had a chance to quickly go through the Lian Li booth today, and scope out what new products are on the horizon for the well respected computer case manufacturer. Even at first glance, I thought the TU-200 was a good idea:
This is essentially the same inside as the PC-Q08 case we have recommended in our small form factor buyer guides, but built with a sturdier outer shell and a handle for easy movement. The most obvious application for this product is for LAN gamers who often move their machines about. The TU-200 is a mini-ITX with space for a full length dual slot graphics card and 4 SATA drives, like the PC-Q08, or space for 6 SATA drives if a small card is used. Expect to see the TU-200 in markets soon, though unfortunately no word on pricing, nor how much weight the handle can take – Lian Li tell me this is still to be tested.
The other main new Lian Li case on show, this time in a large size form factor sufficient for XL-ATX size motherboards, was the PC-100: a new design concept on how a case should be built. Lian-Li have decided to change the position of the motherboard mounting such that the IO panes are at the front of the case, thus having all the USB ports available for immediate use.
This raises a few questions, namely how the airflow is arranged in the case. I pointed out that as the case still has an intake at the front, the warm air from the GPU would rise into the front fan and blow warm air over the CPU. A quick chat with one of Lian Li’s engineers and I found out that this hadn’t been thought of – ultimately the PC-100 is still in the engineering phase – they’re expecting to put a door on the front of the case for easy access to the I/O panel, and as I pointed out the heat issue, they may place the board on the other side of the case so the GPU is at the top – and thus the motherboard is upside down. However, there are still concerns with what to do with Ethernet, audio and everything else to do with the I/O panel – but it’s interesting to see a different design perspective from a case manufacturer.
One other point of note is the HDD bay design. I’d never seen this before on a full size case before today, but on both the PC-90/100 (as well as an Enermax case at Computex) the mounting of 3.5 inch drives has been taken towards the vertical, against the case, to free up some space in terms of case length for high end graphics cards. This could result in more case manufacturers following suit, and less cases only being as long as the high end GPUs.
Facebook
Twitter
RSS
23 Comments
View All Comments
StealthX32 - Wednesday, June 1, 2011 - link
Looks like they didn't bother to address the problem of PSU to HD cage clearances to accept more modular PSUs...And did they eliminate the lower HD cage as well?
Gigantopithecus - Wednesday, June 1, 2011 - link
Yeah it's too bad they didn't increase the overall length by even just a cm or two; that would have greatly alleviated what is imho the only annoyance of the Q08. Regarding your question, "The TU-200 is a mini-ITX with space for a full length dual slot graphics card and 4 SATA drives, like the PC-Q08, or space for 6 SATA drives if a small card is used." So no, they didn't eliminate it, it's just not visible in the picture.wordsworm - Wednesday, June 1, 2011 - link
For years I've been thinking that my next build has got to be the size and weight of what I'm allowed to take on a plane, carry-on. Any idea as to the weight of the case?IanCutress - Wednesday, June 1, 2011 - link
It looked fairly heavy - it had a PSU, one SATA drive but no GPU in it, and the Lian Li representative had a hard time moving it around. Maybe not something you could easily carry in an airport as hand luggage, but easy to move around the house or to the car for a LAN event.JS - Wednesday, June 1, 2011 - link
Exactly my thought. My dream case is sturdy, light, takes a standard ATX PSU, has room for a full size video card, good cooling and is accepted as carry-on luggage. Good looks a definite plus. This one comes pretty close, if it's not too heavy.It would be even better if they skipped the optical bay, or make it slimline, to save space. More than two 3.5" bays is also unnecessary (for me), in a build like this I would go all 2,5".
Mr Perfect - Thursday, June 2, 2011 - link
Yeah, that sounds better. One slim line optical drive and a pair of 2.5 inch drive mounts. If you're carrying this thing around, you don't want to be lugging around desktop sized drives.nubie - Wednesday, June 1, 2011 - link
Check out the GT3 from GTRTechCorp.comYou can purchase from AVA Direct I think.
It is much smaller. The build may be a hassle, and you don't get all the drive bays, but you could put it in a carry-on very easily.
Also it handles full ATX boards, which is preferred to Mini-ITX when you need the horsepower of the latest or greatest technology.
JS - Wednesday, June 1, 2011 - link
I had missed that case completely, and it's not even very new. Thanks for the tip, I will definitely check it out!MilwaukeeMike - Wednesday, June 1, 2011 - link
I've carried a full-size case on a plane once when selling the computer to a distant family member. They let you do it... at least, they did a few years ago. They wiped some explosive detection stuff on it and sent me on my way.Nataku - Wednesday, June 1, 2011 - link
are you sure you want your PC to go through the X-ray? the network manager in our company had some very... um... interesting things happen to his PC after a scan lol