Today MediaTek announces their brand new flagship SoC for smartphones and tablets, the Helio X20. MediaTek continues their Helio SoC branding announced earlier in the year, making the X20 the second SoC in the X-lineup and the first one to be actually released with the new product name from the beginning (as the X10 was a direct name change from the MT6795).

Right off the bat, MediaTek manages to raise eyebrows with what is the first 10 core System-on-a-Chip design. The 10 processor cores are arranged in a tri-cluster orientation, which is a new facet against a myriad of dual-cluster big.LITTLE heterogeneous CPU designs. The three clusters consist of a low power quad-core A53 cluster clocked at 1.4 GHz, a power/performance balanced quad-core A53 cluster at 2.0GHz, and an extreme performance dual-core A72 cluster clocked in at 2.5GHz. To achieve this tri-cluster design, MediaTek chose to employ a custom interconnect IP called the MediaTek Coherent System Interconnect (MCSI).

We'll get back to the new innovative CPU arrangement in a bit, but first let's see an overview of what the rest of SoC offers. MediaTek is proud to present its first CDMA2000 compatible integrated modem with the X20. This is an important stepping stone as the company attempts to enter the US market and try to breach Qualcomm's stronghold on the North American modems and SoCs. Besides C2K, the X20's modem allows for LTE Release 11 Category 6 with 20+20MHz Carrier Aggregation (downstream), supporting speeds up to 300Mbps in the downstream direction and 50Mbps upstream. The new modem also is supposed to use 30% less power when compared to the Helio X10.

The SoC also has an integrated 802.11ac Wi-Fi with what seems to be a single spatial stream rated in the spec sheets up to 280Mbps.

MediaTek Helio X20 vs The Competition
SoC MediaTek
Helio X20
(MT6797)
MediaTek
Helio X10
(MT6795)
Qualcomm
Snapdragon 808
(MSM8992)
Qualcomm
Snapdragon 620
(MSM8976)
CPU 4x Cortex A53 @1.4GHz

4x Cortex A53 @2.0GHz

2x Cortex A72
@2.3-2.5GHz
4x Cortex A53 @2.2GHz

4x Cortex A53 @2.2GHz
4x Cortex A53 @1.44GHz

2x Cortex A57 @1.82GHz
4x Cortex A53 @1.2GHz

4x Cortex A72 @1.8GHz
Memory
Controller
2x 32-bit @ 933MHz
LPDDR3

14.9GB/s b/w
2x 32-bit @ 933MHz
LPDDR3

14.9GB/s b/w
2x 32-bit @ 933MHz
LPDDR3

14.9GB/s b/w
2x 32-bit @ 933MHz
LPDDR3

14.9GB/s b/w
GPU Mali T8??MP4
@700MHz
PowerVR G6200
@700MHz
Adreno 418
@600MHz
"Next-gen" Adreno
Encode/
Decode
2160p30 10-bit
H.264/HEVC/VP9
decode

2160p30
HEVC w/HDR
encode
2160p30 10-bit
H.264/HEVC/VP9
decode

2160p30
HEVC
encode
2160p30, 1080p120
H.264 & HEVC
decode

2160p30, 1080p120
H.264
encode
2160p30, 1080p120
H.264 & HEVC

 

Camera/ISP Dual ISP
32MP @ 24fps
13MP Dual ISP
21MP
Dual ISP
21MP
Integrated
Modem
 LTE Cat. 6
300Mbps DL 50Mbps UL

2x20MHz C.A. 
(DL)
LTE Cat. 4 
150Mbps DL 50Mbps UL
"X10 LTE" Cat. 9
450Mbps DL
50Mbps UL

3x20MHz C.A. 
(DL)
"X8 LTE" Cat. 7 
300Mbps DL 100Mbps UL

2x20MHz C.A. 
(DL & UL)
 

Video encoding and decoding capabilities seem to be carried over from the MT6795 / X10, but MediaTek advertises a 30% and 40% improvement in decoding and encoding power consumption respectively.

Still on the multimedia side, we see the employment of a new integrated Cortex-M4 companion-core which serves as both an audio processor for low-power audio decoding, speech enhancement features and voice recognition, as well as sensor-hub function acting as a microcontroller for offloading sensor data processing from the main CPU cores. This means that while the device has the display turned off but is playing audio, only the M4 is in use in order to prolong battery life.

On the GPU side, the X20 seemed to be the first officially announced Mali T800 series GPU SoC. MediaTek explains that this is a still-unreleased ARM Mali high-end GPU similar to the T880. MediaTek initially chose a more conservative MP4 configuration clocked in at 700MHz, although final specifications are being withheld at this time. It should be noted that Mediatek has traditionally never aimed very high in terms of GPU configurations. It could be considered that the GPU in the X20 could still remain competitive in prolonged sustained loads as we saw larger Mali implementations such as Samsung's Exynos SoCs not being able to remain in the thermal envelope at their maximum rated frequencies. Initial relative estimates of the X20, expressed by MediaTek, compared to the Helio X10's G6200 see a 40% improvement in performance with a 40% drop in power.

On the memory side, MediaTek remains with a 2x32bit LPDDR3 memory interface running at 933MHz. MediaTek reasons that the SoC is limited to 1440p devices and the LPDDR3 memory should be plenty enough to satisfy the SoC's bandwidth requirements (a notion I agree with, given the GPU configuration).

Going back to the signature 10-Core/Tri-Cluster architecture of the SoC, MediaTek explains that this was a choice of power optimization over conventional two-cluster big.LITTLE designs. b.L works by employing heterogeneous CPU clusters - these may differ in architecture, but can also be identical architectures which then differ in their electrical characteristics and their target operating speeds. We've covered how power consumption curves behave in our Exynos 5433 deep-dive, and MediaTek presents a similar overview when explaining the X20's architecture.

One option in the traditional 2-cluster designs is to employ a low-power low-performance cluster, typically always a lower-power in-order CPU architecture such as ARM's A53. This is paired with a higher-power high-performance cluster, either a larger CPU core such as the A57/A72, or a frequency optimized A53 as we see employed in some past MediaTek SoCs, or most recently, HiSilicon's Kirin 930 found in the Huawei P8. 

Contrary to what MediaTek presents as an "introduction of a Mid cluster", I like to see MediaTek's tri-cluster approach as an extension to the existing dual A53 cluster designs - where the added A72 cluster is truly optimized for only the highest frequencies. Indeed, we are told that the A72 cluster can reach up to 2.5GHz on a TSMC 20nm process. ARM aims similar clocks for the A72 but at only 14/16nm FinFET processes, so to see MediaTek go this high on 20nm is impressive, even if it's only a two-core cluster. It will be interesting to see how MediaTek chooses the lower frequency limits on each cluster, especially the A72 CPUs, or how these options will be presented to OEMs.

The end-result is a promised 30% improvement in power consumption over a similar 2-cluster approach. This happens thanks to the finer granularity in the performance/power curve and an increase in available performance-power points for the scheduler to place a thread on. Having a process that is heavy enough that it is not capable of residing on the smallest cluster due to performance constraints, but not demanding enough to require the big cluster's full performance, can now reside on this medium cluster at much greater efficiency than had it been running on the big cluster at reduced clocks. MediaTek uses CorePilot as a custom developed scheduler implementation that is both power aware and very advanced (based on our internal testing of other MediaTek SoCs). My experience and research with it on existing devices was fairly positive, so I'm sure the X20's new v3.0 implementation of CorePilot will be able to take good advantage of the tri-cluster design.

The biggest question and need of clarification is in the area of what the MCSI (the interconnect) is capable of. ARM had announced its CCI-500 interconnect back in February, which incidentally also promised the capability of up to 4 CPU clusters. MediaTek hinted that this may be a design based on ARM's CCI - but we're still not sure if this means a loosely based design or a direct improvement of ARM's IP. Cache coherence is a major design effort, and if MediaTek saw this custom IP as an effort worth committing to, then the MCSI may have some improvements we're still not clear on.

The Helio X20 is certainly an interesting SoC and I'm eager on how the tri-cluster design performs in practice. The X20 samples in H2 2015 and devices with it are planned to be shipping in Q1 2016. In the given time-frame, it seems the X20's primary competitor is Qualcomm's Snapdragon 620, so it'll be definitely a battle for the "super-mid" (as MediaTek likes to put it) crown.

Comments Locked

69 Comments

View All Comments

  • tuxRoller - Wednesday, May 20, 2015 - link

    Because they aren't releasing the source code...contrary to the gpl.
  • BillBear - Tuesday, May 12, 2015 - link

    I've asked for this before, but now that you guys have someone who knows how to selectively disable cores you really need to conduct a series of benchmarks that measure how well Android performs various common tasks with different numbers of cores enabled.

    We all know that desktop OS's have trouble using more than a couple of cores effectively unless you run specialized application software, for example Handbrake.

    I would like to know if the situation is the same on mobile.
  • Andrei Frumusanu - Wednesday, May 13, 2015 - link

    OK.
  • zodiacfml - Wednesday, May 13, 2015 - link

    Brilliant. I just don't know if this will be cost effective for the company considering the additional die size. This reminds of AMD days where they are giving more cores versus a more advanced manufacturing process node of Intel. The more advanced process in the ARM world right now is Samsung which might be lower in power consumption and with better performance versus this Helio x20.
  • Fidelator - Friday, May 15, 2015 - link

    Why is this better than having one cluster of A53s capable of going up to 2.0ghz, scaling down as required and one with the pair of A72s?
  • Andrei Frumusanu - Friday, May 15, 2015 - link

    You can't scale the A53 as low in power in idle situations if it's optimized to reach those frequencies at the same time.
  • Marc GP - Wednesday, May 27, 2015 - link

    Voltage. The low Cortex-A53 cluster is able to run at a lower voltage than the high Cortex-A53 cluster, and the consumption is proportional to the square of the voltage.
  • Marc GP - Wednesday, May 27, 2015 - link

    The power savings come mainly from the voltage reduction, not the frequency reduction.
  • Jimmy12 - Monday, April 25, 2016 - link

    Hong Kong Global Resources Electronic Expo, Oukitel X20 device
    https://goo.gl/GoIwXe

Log in

Don't have an account? Sign up now