External Appearance

The TX550M is the least powerful model of the entire TX series. It is aesthetically simple and subtle, with the designer trying to find a balance between oversimplification and excessiveness. The chassis is sprayed with a satin black paint and decorative stickers cover the largest portion of its sides. These decorative stickers have the company logo and product model printed on them, and are placed in such a way that the sticker facing the right side of a case will always be upright, regardless whether the PSU has been installed with its cooling fan facing upwards or downwards. The sticker with the electrical specifications and certifications of the PSU can be found at the top side of the chassis.


With a body that measures 150 × 86 × 140 mm (5.9 × 3.4 × 5.5 in), the TX550M adheres fully to the ATX design guide, making it compatible with any ATX-compliant case. The design holds no surprises. At the rear we can see the typical AC receptacle and a small on/off switch, while at the front we find the four connectors for the modular cables and the hardwired cables. There are four connectors, three for Molex/SATA cables and one for a CPU/PCIe cable. Note that only the PCIe cable with the two 6+2 pin connectors is included in the original bundle. Still, if the user wants to power a system that requires two 4+4 pin CPU cables but has no PCIe connectors at all, it is possible to do so with a TX550M.

Internal Design

Due to its standard ATX chassis, the largest fan that Corsair could fit in the TX550M is a 120 mm NR120L. Corsair rebrands their fans and we cannot tell who the original manufacturer is but we can tell it has a rifle (advanced sleeve) bearing engine and a maximum speed of about 1500 RPM. The design of the blades suggests that it is a very high-pressure fan, which appears to be a strange selection for a PSU without excessively packed internals.

The OEM behind the creation of the TX550M is a Chinese OEM, Great Wall. We first encountered Great Wall’s designs when Corsair first implemented their platforms back in 2011. Great Wall is not a very popular OEM but they frequently cooperate with Corsair and their products were proven to be reliable.


The filtering stage of the TX550M begins on a small PCB soldered at the back of the AC receptacle and continues onto the main PCB. We counted a total of four Y capacitors, two X capacitors and two filtering inductors, which are the standard for a quality PSU. There is one conversion bridge feeding the APFC circuitry. Surprisingly, the 550W unit has two APFC capacitors, each rated at 450V/220μF. Great Wall could easily replace these two small capacitors with an equally effective larger one. The APFC coil is shielded inside a plastic casing, most likely to prevent electromechanical noise (also known as “coil whine”).

Generally speaking, the platform of the TX550M is technologically simple, based on circuitry designs that are being used into consumer PSUs for many years. Two MOSFETs form the simple half-bridge primary inversion circuitry and four MOSFETs generate the 12V line on the secondary side of the main transformer. The DC-to-DC converters found on the vertical PCB generate the minor 3.3V and 5V rails. It would seem that the PSU owes its 80Plus Gold efficiency rating to the use of highly efficient active components, as we have seen other units using the same base platform with minimal differences failing to reach such high efficiency standards.


All of the capacitors inside the TX550M are coming from Japanese manufacturers. The primary APFC electrolytic capacitors are from Nippon Chemi-Con. The secondary capacitors, electrolytic and polymer alike, are supplied by Nippon Chemi-Con or Rubycon. Both manufacturers are considered to be two of the most reliable manufacturers and are highly popular. The heatsinks of the PSU appear to be adequate for an 80Plus Gold certified PSU but they could definitely be much better.

Introduction, Packaging & Bundle Cold Test Results (Room Temperature)
Comments Locked


View All Comments

  • t.s - Saturday, December 2, 2017 - link

    I mean, all the peripheral on your example is not something that will make the system spent, like 150W
  • 1_rick - Friday, December 1, 2017 - link

    Well, that makes something like this model overkill for a lot of people, then. Just as an example, I have a Corsair CX-430 PSU, an overclocked Ryzen 1600X, and a GTX 950. During a GPU stress test, it will pull a bit under 250 watts. CPU stress tests are somewhat lower--I think under 200W. It idles well under 100, and normal usage is probably 120-160W.
  • mjeffer - Friday, December 1, 2017 - link

    This is one of my annoyances whenever building a new system. It's really hard to find a high quality, low wattage PSU that would represent your true needs. Most major vendors only go budget on low wattage or it's impossible to find someone who's done a teardown to see if it is made with quality parts because reviews are usually only done on grossly overpowered PSUs
  • KAlmquist - Saturday, December 2, 2017 - link

    I've been happy with the Seasonic SSR-360GP, but sadly it appears to have been discontinued. I guess the Antec EarthWatts EA-380 is worth a look.
  • Manabu - Monday, December 18, 2017 - link

    It is getting harder and harder to find high quality low wattage PSUs with enough cables. I'm using 6 sata and 3 ide and 1 6-pin vga cable (gtx 650 ti). My overclocked system draws up to 250W (measured at the wall) with linpack AVX2 and Furmark, but more normal high load is like 150-175W. Thus I would want a 350W psu for a good margin and efficiency.

    Instead I had to buy a 450W 80+gold psu (electricity here is expensive and it runs 24h/d). Previously I used a 420W 80+ bronze psu for 6 years and before that a 400W 80+ psu for 5 years. Power ratings are creeping up, but at least efficiency too. Still, if power ratings continue to go up efficiency for my loads will go down.
  • jhapp - Friday, December 1, 2017 - link

    People need reliability, not 3D graphics. I always buy PNY/Quadro high resolution 2D cards which run about 10 watts per monitor. 3D video cards are expensive and energy wasting. Add them to the long list of things people don't need but think they do because of media hype, like hi-res tvs, or hybrid cars, ethanol, E85, smart phones, cell phones, ...
  • Jimios - Friday, December 1, 2017 - link

    I'd like to see you play a modern game with a 10W 2D Quadro.
  • MadAd - Friday, December 1, 2017 - link

    With CPUs providing basic graphics these days I dont think the average user would buy a 3d card unless they actually had an app demanding it, eg for me Planetside 2 wouldnt even work without a serious graphics card, otherwise I wouldnt bother and just use the onboard.
  • Dr. Swag - Friday, December 1, 2017 - link

    But if you want to play video games...
  • LukaP - Friday, December 1, 2017 - link

    Even if you dont, iGPUs exist, on both sides...

Log in

Don't have an account? Sign up now